Radar Level Sensor，ultrasonic level sensor，guided wave radar， level transmitter-HCCK

SOLUTION

Current location> Industries> Solution

Solutions Of Guided Wave Radar Level Sensor For Complicated Conditions In Silos

Huachuang measurement and control Huachuang measurement and Control Technology Co., 2022-09-02 09:36

Project Overview

This project comes from a feed factory; they need a level sensor installed on the top of feed-producing silos where the situation is complicated.
We need to solve 2 problems for radar sensor selection in this project:

1.There are 3 layers of staggered pipes inside, so the installation space is narrow.
2.And the pipes will send steam into the silo to heat the materials inside.

Our company sent technicians to the site and investigated the situation of the silos. To solve these two problems, we selected the guided wave radar level sensor. Because the guided wave cable can pass through the space between the pipes, which can avoid the false echo generated by non-contact sensors. And the guided wave radar sensor has a strong ability to overcome steam.

Below is the actual installation of our radar level sensor:

Devices and Documents:

1. Devices

1.1 HCDAR-51 guided wave radar level sensor , 1 pcs.

1.2 Process connection flange 1pcs

2. Documents:

2.1 Operation manual 1pcs

2.2 Notes for filed use , notes for installation.

Features:

Continuous measurement: HCDAR-51 radar level sensor adopts a contact-type measuring principle. Electromagnetic waves transmit along the cable and will be reflected back when they reach the surface of materials. The height is then calculated.

Easy installation: Only some simple parameter configuration is needed to obtain accurate measurement values, and it ensures a long service life with stable performance, requiring no routine maintenance.